Miele G 663 Plus Operating Instructions Manual page 37

With the aid of the following guide, minor problems can be fixed without a service
call.
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The dishwasher is not
turned on.
No program is selected.
The fuse is defective or
the breaker has tripped.
Water intake error.
The "Drain" indicator
flashes / lights.
The optic indicator reflec-
tor was not placed in the
steam deflector properly.
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
circuit breaker.
Press "On", select pro-
gram.
Select a program with the
program selection but-
tons.
Reset the circuit breaker.
Make sure it is a 15 A
circuit breaker.
– Turn off the dishwasher.
– Open the water valve.
– Clean the water inlet fil-
ter, see maintenance in-
structions.
The waterproof system
has activated.
– Call the Miele Technical
Service Department.
Install the optic indicator
reflector correctly.
See Installation manual,
"1. Install the steam
deflector".
37