Console Assembly
Hold control panel close to bottom casting. Feedthe
valve/hose/regulatorassembly over the front panel so that it
hangs inside the cart.
Attach short ignitor wire to electrode.
Position valves into burner tubes (see burner-valve view). Rotate
control panel up and rest flangeover rail.
Attach control panel to legs with two screws (3} on right side,
one screw in top hole on left side.
\
N
3
Qty:3
Be sure valves are inserted fully into tubes.
BurnerTubes
ControlPanel
Note:
Consolemay haveunusedholes
forfeaturesin othergrill models.
Valve/Nose
Regulator Ass
20,463363506