Kenmore 415.162320 Assembly Instructions And Care Manual page 15

Leg Extenders, Axle Rod,
Wheelsand Tank Thumbscrew
Turn cart upside down.
insert leg extenders. Checkto make sure leg extender is all the way into the leg.
Attach u-nut (5} to tab. See enlargement of u-nut for correct position.
Threadtank thumbscrew (6) into hole and u-nut. Screw flanged hex nut (7} onto end of tank thumbscrew. Do not tighten
further.
Slide wheel on axle rod. Insert axle rod into large bole in bottom shelf. Attach other wheel with
Two washers (8) and a bitch pin (9}.
5 6 _j/ Qty: 1 8
Qty: 1 Qty:1 7
Not to scale Not to scale Qty: 1 Qty:2
flangedhexnut
Leg Extender
\
\
8
\\ \
Hubon wheelfaces
into grill bottom
Wheel
Stand cart upright and remove
cardboard sleeves
463363506.15