Installing The Wiring Harness - Garmin Fishfinder 100 BLUE Owner's Manual

Installation

Installing the Wiring Harness

Power/Data er/Data
Connection Connection
Speed
Connecting a Transducer to Multiple Sensors
6
Wiring Harness Installation (continued)
If your boat does not have a fuse block, the unit can be wired directly
to the battery. Make sure the 2-Amp in-line fuse supplied with the unit
is installed.
The Fishfi nder 100 Blue can be connected to another piece of NMEA-
compatible electronic equipment. If equipped with a capable transducer
and speed sensor, the Fishfi nder 100 Blue sends depth, temperature and
speed information that could be used by, or displayed on another device.
Temp Transducer