Installing The Wiring Harness - Garmin Fishfinder 160 Owner's Manual

Installation

Installing the Wiring Harness

Power/Data
Connection
Speed
Connecting a Transducer to Multiple Sensors
6
Wiring Harness Installation (continued)
If your boat does not have a fuse block, the unit can be wired directly
to the battery. Make sure the 2-Amp in-line fuse supplied with the unit
is installed.
The Fishfi nder 160 can be connected to another piece of NMEA com-
patible electronic equipment. If equipped with a capable transducer, the
Fishfi nder 160 sends depth, temperature and speed information that could
be displayed on another device.
Temp Transducer