EMU28055
Procedure for tilting down (power
trim and tilt models / power tilt
models)
1.
Push the power trim and tilt switch / pow-
er tilt switch "
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2.
Release the tilt support lever or pull out
the tilt support knob.
3.
Push the power trim and tilt switch / pow-
er tilt switch "
board motor to the desired position.
UP
DN
DN
" (up) until the outboard
ZMU02569
" (down) to lower the out-
ZMU01936
EMU28060
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU28090
Power trim and tilt models / power tilt
models
The outboard motor can be tilted up partially
to allow operation in shallow water.
EWM00660
WARNING
Place the gear shift in neutral before
G
setting up for shallow water cruising.
Return the outboard motor to its normal
G
position as soon as the boat is back in
deeper water.
ECM00260
CAUTION:
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
Operation
DN
ZMU03838
40