Trim Rod (Tilt Pin); Tilt Support Lever For Power Trim And Tilt Or Hydro Tilt Model; Top Cowling Lock Lever(S) (Turn Type) - Yamaha 70 Owner's Manual

Hide thumbs Also See for 70:

Table of Contents

Basic components

1. Trim tab

2. Bolt

EMU26261

Trim rod (tilt pin)

The position of the trim rod determines the

minimum trim angle of the outboard motor in

relation to the transom.

EMU26340

Tilt support lever for power trim and

tilt or hydro tilt model

To keep the outboard motor in the tilted up

position, lock the tilt support lever to the

clamp bracket.

ZMU03097

ZMU02526

EMU26372

To remove the engine top cowling, turn the

lock lever(s) and lift off the cowling. When in-

stalling the cowling, check to be sure it fits

properly in the rubber seal. Then lock the

cowling again by returning the lever(s) to the

lock position.

1. Top cowling lock lever(s)

ZMU02528

ZMU03827

ZMU02596

Table of Contents