Multi-Function Meter Unit - Yamaha FZS10X Owner's Manual

Engine trouble warning light "
This warning light comes on or flashes
when an electrical circuit monitoring the
engine is defective. When this occurs,
have a Yamaha dealer check the self-
diagnosis system. (See page 3-7 for an
explanation of the self-diagnosis de-
vice.)
The electrical circuit of the warning light
can be checked by turning the key to
"ON". If the warning light does not come
on for a few seconds, then go off, have
a Yamaha dealer check the electrical
circuit.
INSTRUMENT AND CONTROL FUNCTIONS
EAU11530
"

Multi-function meter unit

1. Coolant temperature display/air intake tem-
perature display
2. Speedometer
3. Tachometer
4. Odometer/tripmeter/fuel reserve tripmeter
5. "SELECT" button
6. "RESET" button
7. Clock
8. Fuel meter
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit.
The multi-function
equipped with the following:
G
a speedometer (which shows the
riding speed)
G
EAU40173
G
G
G
G
G
G
G
G
G
NOTE:
G
EWA12421
G
meter unit is
3-4
a tachometer (which shows engine
speed)
an odometer (which shows the to-
tal distance traveled)
two tripmeters (which show the
distance traveled since they were
last set to zero)
a fuel reserve tripmeter (which
shows the distance traveled since
the left segment of the fuel meter
started flashing)
a clock
a fuel meter
a coolant temperature display
an air intake temperature display
a self-diagnosis device
an LCD and tachometer bright-
ness control mode
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
SET" buttons.
To switch the speedometer and
odometer/tripmeter displays be-
tween kilometers and miles, press
the "SELECT" button for at least
one second.
3