UNIT (setting displayed units)
5.
(1 second): To return to the nor-
mal display.
UNIT (setting displayed units)
You can change the units that are shown in
each display.
1.
Turn the engine off and the engine start
switch to ON.
2.
(4 seconds): To activate the cus-
tom mode.
3.
: To switch between the setting
function names.
4.
: To switch to the change settings
display.
5.
: Press to switch between the dis-
plays.
Speedometer (
TRIP (trip)
FLOW (fuel flow)
ECON (fuel economy)
TTL (total fuel consumption)
TEMP (ambient water temperature)
DPTH (depth)
Blink
* In the display example, the speedometer
is shown.
59
)