Unit (Setting Displayed Units) - Yamaha 6Y8- 2819U-00 Owner's Manual

UNIT (setting displayed units)

* When the display configuration number
"0" is selected, "HIDDEN" is shown and
the display is not shown.
6. (1 second): To change the display
configuration and return to the custom
mode selection display.
7. (1 second): To return to the nor-
mal display.
NOTE:
When changing two or more display config-
urations of the multifunction display, repeat
steps 4 and 5.
Resetting the display configuration default
settings:
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. : To switch to the change settings
display.
4. + (1 second): To reset the
display configurations to the default set-
tings and return to the custom mode
selection display.
5. (1 second): To return to the nor-
mal display.
UNIT (setting displayed units)
You can change the units that are shown in
each display.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. : To switch between the setting
function names.
4. : To switch to the change settings
display.
5. : Press to switch between the dis-
plays.
Fuel flow
TTL (total fuel consumption)
ECON (fuel economy)
* In the display example, the fuel flow is
shown.
6. : Press to switch between the dis-
played units.
Fuel flow
You can select to show gallons per hour
(gph) or liters per hour (l/h).
The default setting is gallons per hour (gph).
43
Blink