Unit (Setting Displayed Units) - Yamaha 6Y8- 2819U-00 Owner's Manual

UNIT (setting displayed units)

You can change the units that are shown in
each display.
1. Turn the engine off and the engine start
switch to ON.
2. (4 seconds): To activate the cus-
tom mode.
3. : To switch between the setting
function names.
4. : To switch to the change settings
display.
5. : Press to switch between the dis-
plays.
Speedometer (
TEMP (ambient water temperature)
DPTH (depth)
TRIP (trip)
Blink
* In the display example, the speedometer
is shown.
6. : Press to switch between the dis-
played units.
Speedometer
You can select to show miles per hour
(mph), kilometers per hour (km/h), or knots.
The default setting is miles per hour (mph).
)
UNIT (setting displayed units)
TEMP
You can select to show Fahrenheit (°F) or
Celsius (°C).
The default setting is Fahrenheit (°F).
DPTH
You can select to show feet (F) or meters
(m).
The default setting is feet (F).
TRIP
You can select to show miles (M), nautical
miles (NM), or kilometers (km).
The default setting is miles (M).
7. (1 second): To change the dis-
played unit and return to the custom
mode selection display.
8. (1 second): To return to the nor-
mal display.
NOTE:
When the speedometer unit settings are
changed, the TEMP, DPTH, and the TRIP
unit settings are collectively changed auto-
matically. To change the settings for each
displayed unit individually, repeat steps 5
and 6.
32