Wolf DD30 Installation Manual page 9

INSTALLATION
Installation
IN-LINE / REMOTE BLOWER
Insert the electrical supply (Romex) from the in-line or
1
remote blower through the opening on the downdraft
and secure using an approved cord strain relief.
Connect hot to brown, neutral to blue and ground to
2
green. Refer to the illustration below.
WIRING
COVER
Wiring location.
HOT NEUTRAL
GROUND
BLUE
BROWN
In-line / remote blower wiring.
COUNTERTOP MOUNTING
Place the downdraft in the opening, then secure the bottom
brackets to the cabinet base using the wood screws pro-
vided. Once the brackets are secure, tighten the existing
lower bracket screws. Refer to the illustration below.
Secure the top mounting brackets to the countertop using
the wood screws provided. For solid surface countertops,
silicone may be used but is not provided.
Once the top is secure, install the undercounter brackets
using the screws provided then install the side covers. Refer
to the illustration below.
MOUNTING
SCREW
Countertop mounting.
COVER
Cover installation.
| |
wolfappliance.com wolfappliance.com 9 9