Call Park - System - Vodavi Triad Station User Manual

Call Park
SINGLE LINE TELEPHONE
The SLT operation uses the same procedures as used in
Digital Telephone operation described above, except there is
no TRANS button. The user must use 438 and hookflash 439
feature codes.

Call Park - System

An outside line can be placed into one of eight parking
locations and can be retrieved by any station that has a direct
line appearance or an available Loop button. Parked calls have
their own recall timer that recalls the originating station, and if
still unanswered, the Attendant(s).
An outside line may also be placed into a station park location.
The station user then dials a code followed by their station
number to retrieve the call.
To consult, page, or call an internal party while connected
to an outside line:
1. Press the TRANS button, or press the CALL PARK flexible
button. The caller will be put on hold.
2. Dial the parking location (430 to 437), or press the
preprogrammed CALL PARK flexible button. A confirmation
tone will sound.
3. If a busy tone is received, press TRANS twice and dial
another park location, or press the CALL PARK flexible
button for a different parking location.
To retrieve a Parked Call:
1. Lift the handset or press the ON/OFF button.
2. Press the [#] button.
3. Dial the parking location (430 to 437) where the call was
parked, or press the preprogrammed CALL PARK flexible
button.
35