Panasonic VB-42210 User Manual page 34

Using Account Codes
Using Call Waitin
.
Using Forced Verified Account Codes
If your system is set up to use Forced Verified Account Codes,
you must enter a valid account code before dialing an outside
number.
1. Pick up the handset or pregs ON/OFF.
__ 2. Dial #Ill.
.e
3. Dial your account code.
4. Press #.
5. Access an outside line and dial the phone number.
Assigning Unverified Codes to PSD Numbers
You can store Unverified Account Codes under Personal Speed
Dial Numbers. However, you can only use the PSD number to
dial an account code before a call. You canndt use the PSD to
dial an account code during a call.
I. Pick up the handset or press ON/OFF.
2. Press PROG.
3. Press a one-touch key.
4. Dial #7.
5. Dial the account code.
6. Press #.
7. Press HOLD:
8. Replace the handset or press ON/OFF.
Using Call Waiting
Call waiting allows you to send a tone and an optional text
message to a busy extension.
Note: This feature requires system programming or a specific
DBS configuration, and may not be available. For information
see your system administrator or DBS dealer.
Setting Up Call Waiting
1. Pick up the handset or press ON/OFF.
2. Dial the extension number.
3. When you hear a busy tone, press 3.
,
4. If you want to send a text message with call waiting
(optional), press one of the following:
l
5 = Visitor Here
l
6 = Need Help
l
7 = Important
l
8 = Urgent
l
9 = Emergency.
5. To wait for the called extension to answer, remain on the
phone. To "camp-on" to the extension, hang up.
When the
extension becomes free, it will automatically call your
number.
Notes:
.
If call waiting is accepted, the busy tone changes to a
ringing tone.
.
You carmot send a call waiting message to at1 extension
that has an Absence Message or Do-Not-Disturb
registered.
6 fhmmtmicatinn
Within Your Office :