Using The Setup Menus - Pace DC758D Operator's Manual

USING THE SETUP MENUS

In addition to the user settings described on pages 16 through 23, setup menus may be available in your on-screen guide. These should be described in
the information provided by your service-provider. There may also be on-screen information to explain these menus.
However, certain settings may affect how your set-top and TV work. See the table below for information about typical menu items and settings (they
depend on which on-screen guide is running on your set-top, so may vary from those given below).
Item Options
Cable Box Front LED
Setup Display
RF Bypass
Configuration
Audio Default Audio
Track
Optimal
Stereo
Audio
Output
Screen
position
Other items and options may be available on these screens. The menus may be subject to change in the future, as your set-top advances with new technology.
Settings Notes
Current Time, If setting is "Current Time", the time is displayed on the front panel when your set-top is
Current Channel switched on. If setting is "Current Channel", the program channel number is displayed.
Off, On This must be "On" before you can use RF Bypass.
For information about RF Bypass, see page 14.
Allows you to view the configuration of your set-top.
Channel Default, Sets the language track that your set-top first attempts to use when tuning to a channel.
English, various "Channel Default" means your set-top uses the default audio track for the program.
other languages Selecting a language means it uses the corresponding language track, if it is available.
Selecting this option enables your set-top to regulate the volume to minimize sudden
changes in volume, for example during a commercial break.
TV Speakers, If you select "Advanced", further settings are displayed, allowing you to set the Compression
Stereo, Advanced (to None, Light, or Heavy) and the Stereo Output (to Mono, Stereo, or Matrix Stereo).
This allows you to adjust how the picture displays on your TV screen.
DC758D OPERATOR'S MANUAL (501-3333200)
24