Setup A - Home Theater System With Hdtv (Hdmi Connection) - Pace XG1-P User Manual

CONNECTING THE EQUIPMENT (cont.)
Setup A - Home theater system with HDTV
(HDMI connection)
Setup A uses an HDMI connector to connect to the HDTV. This displays the highest quality picture on your HDTV and also means there will be no picture
degradation on any copy-protected programs (provided the link remains secure – see page 7).
VCR
POWER
DVD
POWER
WALL AC
HOME
OUTLETS
THEATER
RECEIVER
POWER
CABLE INPUT
This diagram shows a video path from your set-top box to a VCR to allow recording by the VCR. It shows
a video path from the VCR to the TV to allow playback of videos. Video signals fed through a VCR may be
affected by copyright protection systems, which can cause picture distortion on your TV.
Do not, therefore, use a path through a VCR to watch your set-top box's programs.
Use the HDMI path or an alternate direct video path from your set-top box to your TV. Remember to select the
correct input on your TV.
LEFT
LEFT
AUDIO IN
AUDIO OUT
RIGHT
RIGHT
AUDIO IN
AUDIO OUT
VIDEO IN
VIDEO OUT
DIGITAL AUDIO OUT
COAXIAL OPTICAL
VCR IN
DIGITAL AUDIO IN
LEFT
AUDIO IN
COAXIAL
AUDIO IN
RIGHT
AUDIO IN
VIDEO IN
NOTE
XG1-P (PX001BNT and PX001BNM) USER GUIDE DRAFT (501-100190x)
TV / RF
OUT
RIGHT
ANTENNA/
AUDIO IN
RF IN
LEFT
AUDIO IN
VIDEO IN
COMPONENT
VIDEO IN
COMPONENT
Y IN
VIDEO OUT
PB IN
Y
PB/CB
PR IN
PR/CR
OPTICAL
AUDIO IN
ANTENNA/
RF IN
WALL AC OUTLET
WALL AC OUTLET
NOTE
This diagram shows power cords
that have 2-blade polarized plugs.
You may need to use a different
type of plug in the region where
you live.
HDTV
HDMI
POWER
8