Port Leds; Conditions Indicated By The Power Supply Leds - Cisco Nexus 6000 Installation Manual

Port LEDs

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m .
Indicator
PSU Status
Indicators
Chassis Locator
Table D-1

Conditions Indicated by the Power Supply LEDs

You can determine the power supply conditions by combining the LED states of the OK and FAIL LEDs
(see
Table D-1
Power Supply Condition
No AC or DC power to all power supplies.
Power supply failure, including over voltage, over current, over temperature,
and fan failure.
Power supply warning events where the power supply continues to operate.
These events include high temperature, high power, and slow fan.
AC present, 3.3 voltage standby (VSB) on, and the power supply unit is off.
For a DC power supply, it indicates that DC power is present.
Power supply on and OK.
Port LEDs
This section includes the following topics:
•
•
Cisco Nexus 6000 Series Hardware Installation Guide
D-2
Location
Power Supply
(front)
Front of Chassis Identify
table describes the status of the two power supply LEDs
Table D-1).
Power Supply LED Descriptions
Ethernet Port LEDs, page D-3
Ethernet and Fibre Channel LEDs, page D-3
Function Color
PSU Health Green
(multi-color)
Amber
Blue
selected chassis
Appendix D
Status State
Off No AC power to power
supply
Solid On Power supply on and
OK
Solid On Power supply failures,
over voltage, over
current, over
temperature
1 Hz AC present, 3.3VSB
on, PSU is off
blinking
Off Operating normally
Solid O Chassis has been
selected for locating
Off Chassis is not selected
for locating.
OK LED
(Green)
Off
Off
Off
Blinking
On
OL-xxxxx-xx
LEDs
FAIL LED
(Amber)
Off
On
Blinking
Off
Off