Cisco Nexus 6000 Installation Manual page 29

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 6 k d o c s @ c i s c o . c o m .
Installing the Cisco Nexus 6000 Series Switches
This chapter describes how to install the Cisco Nexus 6000 switch. This chapter includes the following
sections:
Preparing for Installation, page 2-2
•
Installing the Switch, page 2-5
•
Grounding the Switch, page 2-7
•
Starting the Switch, page 2-12
•
Installing A Reverse Airflow System for Norcal-96, page 2-14
•
• Removing Fan Shutters, page 2-16
Before you install, operate, or service the system, see the Regulatory, Compliance, and Safety
Note
Information for the Cisco Nexus 6000 Series, Cisco Nexus 5000 Series, Cisco Nexus 3000 Series, and
Cisco Nexus 2000 Series for important safety information.
Warning IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Only trained and qualified personnel must be allowed to install, replace, or service this equipment.
Warning
Statement 1030
OL-15902-01
C H A P T E R
Cisco Nexus 6000 Series Hardware Installation Guide
2
2-1