Cisco Nexus 6000 Installation Manual page 43

Chapter 2 Installing the Cisco Nexus 6000 Series Switches
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 6 k d o c s @ c i s c o . c o m .
When converting the system airflow direction, the fan louvers must be removed and rotated 180 degrees
Caution
so that the airflow direction arrows on top of the louvers match the configuration.
Fan louver installation is shown in
Figure 2-3
To install a fan louver, follow these steps:
Step 1 Engage the latch into the bottom slots.
Step 2 Push the handle until the top latch snaps in.
To remove a fan louver, follow this step:
Hold the handle and pull towards you.
Step 1
OL-15902-01
Figure 2-3.
Fan louver inslallation
Installing A Reverse Airflow System for Norcal-96
Cisco Nexus 6000 Series Hardware Installation Guide
2-15