Assembly Instructions - Kärcher K 7000 G Operator's Manual

Toolsrequired, adjustable pliers.
Step I
Tilt machine back-
wards slightly (caution: oil may
leak if tilted too far). Attach the
front guard to the frame. Align
holes, insert bolt and tighten
with lock nut.
[]
Step 2
Attach the handle
to the frame of the pressure
washer. Align holes, insert bolt,
and tighten with knob.
Step 3 Attach high
pressure hose to
trigger gun.
' Iiiii1 Illlll "
Step 4
Attach the triple jet nozzle to the
spray wand.
Step 5
Attach the spray wand to the
trigger gun.
Step 6
Check oillevel. O_ level ,al_ouk:l
to the oil fillerneck. Be surethe machine is
level when checking the oillevel. (Referto the
engine'soperating manual for seasonalgrades.)
,Step 7
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
important! Do not run the engine with a high or low oil levei as this can cause 1
enginedamag__ IfyouhaVefurthetqueStionsregardngthaangne p ease refer t0 the I
l engine'S operating manual inciUded with the J