Special Keyboard Features - Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode Scanner Configuration Manual

Special Keyboard Features

³ 1 1 6 3
³ 1 1 6 3
³ 1 1 6 3
³ 1 1 6 3
³ 1 1 6 3
³ 1 1 6 3
³ 1 1 6 2
³ 1 1 6 2
† These settings only apply if the Alt-Mode (shown above) is enabled.
³ 1 1 6 7
³ 1 1 6 7
11–4
Transmit Make Code Only – Not available on
all models.
1 1
* Transmit Make/Break Code – Not available on
all models.
0 1
* Transmit FOH Break Code – The scanner will
transmit the FOH in the break-code sequence.
1 0
Do Not Transmit FOH Break Code
0 0
Transmit Cleanup Bit – Use for certain NEC
computers.
1 5
* Do Not Transmit Cleanup Bit
0 5
Enable Alt-Mode – See Enable ALT-Mode
(Normal) for description.
1 7
* Disable Alt-Mode – Caution: If host software
application uses the right Alt key as a "Hot" key,
0 7
Alt-mode must be disabled.
* Enable Alt-Mode (Normal)
The scanner will duplicate the following keyboard
0 6
sequence; Hold down the Alt key and Type the
three digit decimal number that corresponds to
the appropriate character.
Enable Alt-Mode (Advanced)
The scanner will duplicate the following keyboard
1 6
sequence; Hold down the Alt key and Type the
four digit decimal number that corresponds to the
appropriate character.
†
†