Honeywell MK9535-79A540 - MS9535 VoyagerBT - Wireless Portable Barcode Scanner Configuration Manual page 96

³ 8 1 9 5
³ 8 1 9 5
³ 8 1 9 5
³ 1 2 3 9
³ 1 2 3 9
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
³ 1 2 3 7
19–2
Sleep in 2 Minutes – The scanner will go into
sleep mode after the laser has been off for
1 2 0
2 minutes.
Sleep in 5 Minutes – The scanner will go into
sleep mode after the laser has been off for
3 0 0
5 minutes.
Sleep in 10 Minutes – The scanner will go into
sleep mode after the laser has been off for
6 0 0
10 minutes.
* Enable Scanning in Cradle
0 7
Disable Scanning in Cradle
1 7
Enable In Stand Error Audio Indicator –
Activates an audible indicator the when the
1 1
scanner is in the stand/charging cradle but is not
making contact via the battery terminal contacts.
* Disable In Stand Error Indicator
0 1
* Enable Cradle LED
0 2
Disable Cradle LED
1 2
Enable Range Gate – Store scanned bar codes
into RAM if the wireless connection has been
0 7
interrupted.
* Disable Range Gate
1 7
Enable BT Test – The cradle will display certain
connection information (KO, OK, etc.).
1 6
Note: Do not enable this feature unless instructed
* Disable BT Test
0 6
to by a Honeywell representative.