Codabar Concatenation - Honeywell 2020-5 User Manual

When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar bar codes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16 and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatenation, the
image scanner looks for a Codabar symbol having a "D" start character, adja-
cent to a symbol having a "D" stop character. In this case the two messages
are concatenated into one with the "D" characters omitted.
Character
Start Stop Start Stop
Codabar
A12D D34A
Select Require to prevent the image scanner from decoding a single "D" Coda-
bar symbol without its companion. This selection has no effect on Codabar
symbols without Stop/Start D characters.
On
Off
Require
6 - 4