Hauppauge WinTV-DVB Installation And Reference Manual page 52

WinTV-DVB / NEXUS Installation and Reference Manual
PID .........................The PID separates, from the multiplicity of the (Packet-
def. Multicast PID.If a provider transfers a multicast of DVB data services
Set..........................This displays whether a filter is set (in use). UC = Unicast
MAC .......................The MAC address is a means continuing the differentia-
IP............................The IP address is for setting the allocation of filters to
46
Identifier) DVB signal, an individual packet stream. This
allows the reception of the desired radiated DVB data ser-
vice from the service provider.
with the same PID, the value should be entered here.
Otherwise the input field should remain empty.
filters; BC = Broadcast filters; MC = Multicast filters. The
filter can be only set by the WinTV-DVB-s data application,
if the use is permitted (shown in the field: use) and a valid
PID (field PID) was entered.
tion of the package stream selected on the basis the PID.
Thus, the only packet with the correct address reaches
the Windows network layers. With multicast DVB data ser-
vices the MAC address can be calculated from the IP
address. In this case, the input of the IP address is suffi-
cient.
Client applications and the address input with multicast fil-
ters.