Hauppauge WinTV-DVB Installation And Reference Manual page 29

LNB/Satellite.........Selection of the LNB or the satellite. Select the satellite
H / V .......................Select polarization plane here (horizontal or vertical).
Symbolrate............Selection or input of the symbol rate. The input of the
Frequency .............Adjustment of the transponder frequency. The transpon-
<-? | ?->...............Searches for the preceding or next transponder on the
PSI Read ...............This reads the program-specific information of the DVB
Scan.......................The Scan function allows you to search for DVB channels
AutoScan...............The autoscan option starts the automatic fast scanning of
If certain channel are not found try using the Scan option or <-?|?->
WinTV-DVB / NEXUS Installation and Reference Manual
here, on which channels you would like to Scan.
symbol rate needs to be correct for the WinTV-NEXUS-s
card, in order to detect the appropriate transponder.
der frequency can be selected with the sliding control or
gradually with the arrow keys.
basis of the up-to-date stopped frequency. The search
takes place on the selected satellite with the adjusted
polarization and symbol rate.
signal, which is broadcasted on the transponder by the
satellite operators and added to the program list and
updated accordingly.
over the entire frequency range on a satellite position. The
search takes place on the selected satellite with the adju-
sted polarization and symbol rate.
the frequency range of the selected satellite.The values for
the selected polarization and symbol rate do not effect the
scanning process.
23