Hauppauge WinTV-DVB Installation And Reference Manual page 49

Tuner-Status
Synchronization:
It indicates whether a DVB signal is detected.
Signal quality:
This displays the quality of the received signal. A value of 100 % shows a
faultless reception. (Bit fault rate better than 10 -4 )
Signal strength:
The level of the received signal as a percentage. With the aid of this
value, the alignment of the satellite dish can be more easily optimized.
Acoustic signalization:
The acoustic signalization option gives a verbal output of the signal level
through the sound card.This option is present to further aid the alignment of
the satellite dish.
Tuner Adjustments:
Frequency .............This allows you to set the transponder frequency.
Symbolrate............This allows you to set the symbol rate that is being broad-
H / V .......................This option allows you to specify the polarization of the
QAM.......................This setting is only applicable to DVB-c (cable) cards and
WinTV-DVB / NEXUS Installation and Reference Manual
cast. The provider of the service should give the symbol
rate.
broadcast.
is given by the cable operator.
43