Problem: The Picture Is Distorted; Problem: After Installing The Wintv Dvb / Nexus You Cannot Access A Novell Netware Server; Problem: No Sound; Problem: No Output To A Tv Set - Hauppauge WinTV-DVB Installation And Reference Manual

Table of Contents

Advertisement

Universal LNB. If you do need to change to a Universal LNB then you will
also need to change the Multi-switch as well if one is being used.
Problem: The picture is discoloured
1. Check in the computers BIOS SETUP fora setting called "Latency Timer".
You can change this value to 32, 64, 96.
2. Change your VGA card display to 16 Bit (High Color).
Problem: After installing the WinTV-DVB / NEXUS
you cannot access a Novell Netware Server
You need to check the bindings for the TCP/IP protocol by going to (Start /
settings /control panel / Network) and select the properties for the "Virtual
DVB-s/-c/-t Network Adapter". Please ensure that only TCP/IP is selected for
Bindings and not IPX/SPX Protocol.

Problem: No sound

WinTV-NEXUS-s: the sound is carried from the AV-cable of the WinTV-
NEXUS-s card using the 3,5 mm connection to the "Line-In" on your sound
card.
WinTV-DVB-c: the sound is carried from the line-out cable to the "Line-In" of
the soundcard.
You must also check that the "Line In" is not muted in the windows volume
control panel by going to:
start / program / accessories / entertainment / volume control / options /
properties
If you then make sure that "Line-In" is selected in the playback window and
click on OK, you may see that it is selected for mute which you should remo-
ve.
Problem: no Video output to a TV set
Please ensure that you have the correct SCART cable for the Video In link on
your TV set.
WinTV-DVB / NEXUS Installation and Reference Manual
55

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wintv-nexusWintv-nexus-sWintv-dvb-c

Table of Contents