Table of Contents
Advertisement
wear ANSI-approved safety goggles and a dust mask/respirator when using or perform-
ing maintenance on this tool.
1.
use clamps (not included) or other practical ways to secure and support the
workpiece to a stable platform. Holding the work by hand or against your body is
unstable and may lead to loss of control.
2.
do not force the tool. use the correct tool for your application. The correct tool
will do the job better and safer at the rate for which it is designed. Do not force the tool
and do not use the tool for a purpose for which it is not intended.
do not use the power tool if the power switch does not turn it on or off. Any tool
3.
that cannot be controlled with the Power Switch is dangerous and must be replaced.
4.
disconnect the power cord plug from the power source before making any ad-
justments, changing accessories, or storing the tool. Such preventive safety mea-
sures reduce the risk of starting the tool accidentally. Always unplug the tool from
its electrical outlet before performing any inspection, maintenance, or cleaning
procedures.
store idle tools out of reach of children and other untrained persons. Tools are
5.
dangerous in the hands of untrained users.
Maintain tools with care. keep cutting tools sharp and clean. Properly maintained
6.
tools with a sharp cutting edge are less likely to bind and are easier to control. Do not
use a damaged tool. Tag damaged tools "Do not use" until repaired.
check for misalignment or binding of moving parts, breakage of parts, and any
7.
other condition that may affect the tool's operation. if damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
use only accessories that are recommended by the manufacturer for your model.
8.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
tool service must be performed only by qualified repair personnel. Service or
1.
maintenance performed by unqualified personnel could result in a risk of injury.
when servicing a tool, use only identical replacement parts. follow instructions
2.
in the "Inspection, Maintenance, And Cleaning" section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
support workpiece with worktable.
1.
SKU 02485
tOOl use And cAre
serVice
specific sAfety rules
for technical questions, please call 1-800-444-3353.
Page 4
Hide quick links:
Advertisement
Table of Contents
