Page 1
DISC SANDER - 12 INCH 43468 SEt up AND OpERAtINg INStRuCtIONS Distributed exclusively by Harbor Freight tools ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.
. Do not wear loose clothing or jewelry as they can be caught in mov- ing parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair. REV 09b SKU 43468 For technical questions, please call 1-800-444-3353. Page 2...
Page 3
Otherwise, the extension cord could melt and catch fire, or cause electrical dam- SKU 43468 For technical questions, please call 1-800-444-3353. Page 3...
Mount the Sanding Pad (1). See page 5 for instructions. Place the Mitre Gauge on the Work Table (46). Insert the Plug (73) into an electrical outlet with a minimum current capability of 20 amps. REV 09b SKU 43468 For technical questions, please call 1-800-444-3353. Page 4...
Loosen the Lock Knob Bolts (7), and tilt the table to the desired angle as read on the Scale Plate (43). Retighten the Lock Knob Bolts. Replacing Sanding pad Remove Work Table (46) assembly. SKU 43468 For technical questions, please call 1-800-444-3353. Page 5...
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARIS- ING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 43468 For technical questions, please call 1-800-444-3353. Page 6...
Flat Washer 4 Gauge Slide Cross Panhead Screw, M4*6 NOtE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. REV 09b SKU 43468 For technical questions, please call 1-800-444-3353. Page 7...