Specifications; General Safety Rules; Work Area; Electrical Safety - Central Machinery 93981 Assembly And Operating Instructions Manual

Power requirement
Motor
disc speed
Belt speed
switch
sanding Belt size
sand disc size
Table size
Table Tilt
Miter Gauge
overall dimensions
Weight
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. keep your invoice with this
manual. Write the invoice number on the inside of the front cover. keep the manual and
invoice in a safe and dry place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS
failure to follow all instructions listed below may result in
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
Do not operate power tools in explosive atmospheres, such as in the presence
2.
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. dis-
3.
tractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and
1.
refrigerators. There is an increased risk of electric shock if your body is grounded.
2. Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
skU 93981

SPECIfICATIONS

120 vaC, 60 Hz
3/4 HP input, 1/3 HP output
1780 rPM
1150 FPM
Toggle with safety lock
4 (W) x 36 (l) inches, 80 grit
6 inch diameter, 80 grit
7-1/2 (W) x 5 (l) x ¾ (d) inches
0 ~ 60 degrees downward
5 x 3-1/4 x 1-5/8 (H) inches; 0 ~ 60 degree l/r
24-3/4 (H) x 15 (W) x 14 (d) inches
37.5 lb.
SAVE ThIS MANUAL

GENERAL SAfETY RULES

WARNING!
electric shock, fire, and/or serious injury.
SAVE ThESE INSTRUCTIONS

Work Area

Electrical Safety

For technical questions, please call 1-800-444-3353
REV 09/06
Page 2