Table of Contents
Advertisement
Size
Speed
Table
Table Tilt
Dust Chute
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Write the product's serial number in the back of the manual near the assembly dia-
gram, or write month and year of purchase if product has no number. Keep this manual
and invoice in a safe and dry place for future reference.
warning: When using electric tools, basic safety precautions should always be followed to
reduce the risk of fire, electric shock, and personal injury, including the following:
reaD all instructiOns BefOre using tHis tOOl
1.
Keep wOrK area clean. Cluttered areas invite injuries.
cOnsiDer wOrK area cOnDitiOns. Don't use machines or power tools
2.
in damp, wet, or poorly lit locations. Don't expose to rain. Keep work area well
lit. Don't use tools in the presence of flammable gases or liquids.
Keep cHilDren away. All children should be kept away from the work area.
3.
Don't let them handle machines, tools or extension cords.
4.
stOre iDle eQuipMent. When not in use, tools should be locked up in a dry
location to inhibit rust. If possible, store in an area out of reach of children.
DOn't fOrce tHe MacHine Or tOOl. It will do the job better and more safely
5.
at the rate for which it was intended.
use tHe rigHt tOOl. Don't force a small tool or attachment to do the work of a
6.
larger industrial tool. Don't use a tool for a purpose for which it was not intended.
Dress prOperly. Don't wear loose clothing or jewelry. They can be caught in
7.
moving parts. Protective, electrically non-conductive gloves and non-skid footwear
are recommended when working. Wear protective hair covering to contain long hair,
preventing it from getting caught in machinery.
for technical questions, please call 1-800-444-3353.
SKU 34951
specificatiOns
Disc
5"
3450 RPM
4" x 7-1/4"
45° (both)
1-1/2" (both)
save this Manual
iMpOrtant safety precautiOns
Belt
Motor
1" x 30"
3350 FPM
5" X 5"
Weight
1/3 HP, 2.4 A, 110 V~,
60 Hz, Single Phase
17 Pounds
Page 2
Hide quick links:
Advertisement
Table of Contents
