Table Of Contents - Omega Excalibur AL-1810-EDP Operation Manual

Table of Contents

Advertisement

Time can be used for difficult-to-start engines. This feature should only be
programmed by the installer.
Note: "Base timing" is the maximum time period that the AL-1810-EDP will
engage the starter, but only if it does not detect the engine has started running.
Feature #8 Programmable Remote Start Relay
Factory Default Setting
Ignition Output
(
press "arm/lock" button to program
Options:
Accessory Output
(
press "disarm/unlock" button to program
Starter Output
(
press "II" button to program
The Excalibur AL-1810-EDP features 4 dedicated remote start output relays, one
of which is programmable (this is the unit's large blue output wire). Operation
choices are ignition, accessory or starter power output. This feature should only
be programmed by the installer.
Feature #9 Arm, Disarm or Additional Channels
Factory Default Setting
Arm / Disarm
press "arm/lock" button to program
(
Options:
press "disarm/unlock" button to program
Arm / Channel 5
(
Channel 4 / Disarm
(
press "II" button to program
Channel 4 / Channel 5
(
press "III" button to program
The AL-1810-EDP has outputs designed for arming and/or disarming a factory-
equipped security system. These wires may be used instead to provide further
system outputs, which are remotely operated by the controller or transmitter. These
outputs are in addition to the 2nd channel and 3rd channel outputs, the operation of
all of these outputs is explained on page 17.
As shown in the programming assignment, the arm, disarm, channel 4 and
channel 5 are programmable as various combinations. For example, if the disarm
output is needed, but not the arm output, then channel 4 may be made available for
use.
Feature #10 Gasoline Or Diesel Engine
Factory Default Setting
Gasoline
Option:
Diesel
This feature changes the system's timing of the ignition and starter output sequence
for remotely starting vehicles with a diesel engine. This feature should only be
programmed by the installer.
)
)
)
)
)
press "arm/lock" button to program
(
press "disarm/unlock" button to program
(
Page - 42
Introduction to the System ..................................................... 4-6
Using the Excalibur System .................................................... 7
Arming Using the Controller or Transmitter .......................... 7-8
Arming Bypass, Sensor Bypass
)
Disarming By Emergency Override ....................................... 11-12
Remote Panic Feature ............................................................. 12
Remote Engine Starting .......................................................... 13-16
)
Safety Features, Stick Shift Remote Starting; Pit-Stop; Turbo Timer
Other Controller and Transmitter Operations ......................... 16-17
2nd Channel, 3rd Channel, Silent Arming & Disarming
Using the Valet Switch ........................................................... 17-19
SecureCode .............................................................................. 19-20
The Status Light ...................................................................... 20-21
2-Way Controller .................................................................... 22-24
Icons & Programming
Anti-Carjacking Protection ..................................................... 25
Controller and Transmitter Protection .................................... 26
How to Program Controller or Transmitters ........................... 26-27
)
How to Program Features ....................................................... 28-29
)
User Programmable Features .................................................. 30-37
Installer Programmable Features ............................................ 38-42
Complete Programmable Features Matrix .............................. 43
Limited Lifetime Warranty .............................................. Back Cover
This Booklet Contains
An Important Note ........................................
Page - 3
6
,
Sensor Bypass

Advertisement

Table of Contents
loading

Table of Contents