Remote Panic Feature - Omega Crime Guard 850i5 Operation Manual

Step 2 Using the ignition key, turn the vehicle's ignition switch on.
Step 3 Within 5 seconds press and release the Valet Switch one time. The system
will disarm.
The number of Valet Switch presses which are required for the Emergency
Override is custom-programmable! This is the SecureCode feature, which is
described on pages 19 & 20. The above Emergency Override instructions reflect
the "as received from the factory" default setting.

Remote Panic Feature

Should you feel threatened, or the need to attract attention, you can activate your
system's remote "Panic" feature at any time by pressing and holding for 3 seconds
the controller or transmitter's "arm/lock", the "disarm/unlock", or the "III"
button. Your system will respond by sounding the siren and flashing the parking
lights for the normal activated alarm period of 30 seconds.
Additionally, the Crime Guard system features an unique "enhanced" remote Panic
operation, regarding additional operations during Panic, and in association with the
transmitter button used in it's activation or deactivation:
• Activating Panic with the "arm/lock" button will lock the doors, arm the
system and engage the starter interrupt.
• Activating it with the "disarm/unlock" button will unlock the doors, disarm
the system and does not engage the starter interrupt.
• Activating Panic with the "III" button will not affect the system's armed or
disarmed status; the doors locked or unlock condition; nor will it affect the
starter disable circuit.
To disengage remote Panic, simply press and release any one of the same three
transmitter buttons, or, allow it automatically stop after 30 seconds.
• Deactivating Panic with the "arm/lock" button will stop Panic, and leave the
system armed with the starter interrupt engaged, and the doors locked.
• Deactivating it with the "disarm/unlock" button will stop Panic, and leave the
system disarmed with the starter interrupt disengaged, and the doors unlocked.
• Deactivating Panic with the "III" button will stop Panic, and leave the system
in the same state it was in at the moment Panic started, without locking or
unlocking the doors.
• If the system is allowed reset itself from remote Panic, it will enter the armed
state, locking the doors and engaging the starter interrupt, regardless of which
of the three buttons was used to activate it.
If desired, it is possible to have the "III" button operate the 3rd channel output or the
two optional further channel outputs, instead of remote Panic- see page 37.
Page - 12
Feature #6 Doors Lock With Ignition On
Factory Default Setting On
Option: Off
This feature configures the system to automatically lock the vehicle's doors every
time that the ignition switch is turned on. An exception to this would be if feature
#8 is turned on, and a door being open when the ignition switch is turned on. The
following feature #7 controls the automatic unlocking operations, and feature #8
provides for an override of this automatic locking if a door is open when the ignition
is turned on.
Feature #7 Doors Unlock With Ignition Off
Factory Default Setting On (all doors will unlock)*
press "III" button to program
(
Options:
press "arm/lock" button to program
Off (
Driver's Door Only*
All Doors Except Driver's Door*
Similar to the previous locking feature, except this feature controls the unlock
operations when the ignition is turned off, and it has more options because of the
5
850i 's multiple unlocking outputs.
*Multiple unlock outputs offer the capability of unlocking only the driver's
door when the system is disarmed (Driver Door Priority Unlocking), and then the
option of unlocking all doors with a second press of the "disarm/unlock" button.
The driver's door unlocking differently from the other doors must be config-
ured when the system is installed!
If the system is installed without the Driver's Door Priority Unlocking
interface, this feature unlocks all of the doors when the ignition switch is turned off.
If Driver's Door Priority Unlocking is installed, this feature can control only the
driver's door unlocking when the ignition is turned, all doors unlocking, or all doors
except the driver's. The following feature provides for an override of this automatic
unlocking if a door is open when the ignition is turned off.
Feature #8 Open Door Bypass of Ignition Locking
Factory Default Setting On
Option: Off
This feature cancels the automatic locking or unlocking of the vehicle's doors
should one of the doors is open when the ignition switch is turned on or off.
Feature #9 Confirmation Chirps
Factory Default Setting On
( press "arm/lock" button to program
Options:
( press "arm/lock" button to program
press "disarm/unlock" button to program
(
)
)
( press "disarm/unlock" button to program
( press "II" button to program
( press "arm/lock" button to program
press "disarm/unlock" button to program
(
)
Page - 33
)
)
)
)
)
)