Table of Contents
Advertisement
Quick Links
L I M I T E D
L I F E T I M E
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT,
INC. (the "Company"), are warranted to be free from defects in materials and
workmanship under normal use. If a product sold by the Company proves to be
defective, the Company will repair or replace it free of charge within the first year
and thereafter all parts to be repaired will be free with only a nominal charge for
Omega's labor and return shipping, to the original owner during the lifetime of the
car in which it was originally installed.
All products for warranty repair must be sent postage prepaid to Omega
Research & Development, Inc., P.O. Box 508, Douglasville, Georgia 30133, or
send via UPS to: 981 N. Burnt Hickory Rd., Douglasville, Georgia 30134, with
bill of sale or other dated proof of purchase. This warranty is nontransferable and
does not apply to any product damaged by accident, physical or electrical misuse
BACK COVER
or abuse, improper installation, alteration, any use contrary to its intended
function, unauthorized service, fire, flood, lightning, or other acts of God.
PRINTER'S NOTE:
This warranty limits the Company's liability to the repair or replacement of
the product. The Company shall not be responsible for removal and/or reinstallation
production back cover
charges, damage to or theft of the vehicle or its contents, or any incidental or
consequential damages caused by any failure or alleged failure of the product to
is color; this is a
function properly. UNDER NO CIRCUMSTANCES SHOULD THIS
WARRANTY, OR THE PRODUCT COVERED BY IT, BE CONSTRUED
place marker cover.
AS A GUARANTEE OR INSURANCE POLICY AGAINST LOSS. The
Company neither assumes nor authorizes any person or organization to make any
warranties or assume any liability in connection with the sale, installation, or use
of this product.
This device complies with F.C.C Rules part 15. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference
and, (2) This device must accept any interference that may be received, including
interference that may cause undesired operation.
The manufacturer is not responsible for any radio TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user's authority to operate the equipment.
Omega Research and Development, Inc.
Douglasville, Georgia
www.caralarm.com
W A R R A N T Y
P. O. Box 508
30133
02/07 MO-CG-750i5
Crime Guard
750i
OPERATION MANUAL
FRONT COVER
PRINTER'S NOTE:
production front cover
is color; this is a
place marker cover.
COPYRIGHT 2007: OMEGA RESEARCH & DEVELOPMENT, INC.
5
Advertisement
Table of Contents
Related Manuals for Omega Crime Guard 750i5
Summary of Contents for Omega Crime Guard 750i5
- Page 1 750i Omega's labor and return shipping, to the original owner during the lifetime of the car in which it was originally installed. All products for warranty repair must be sent postage prepaid to Omega Research &...
-
Page 2: Complete Programmable Features Matrix
#6,243,004 #6,249,216 #6,275,147 #6,297,731 #6,320,514 #6,320,498 24 Unlock Relay Functions Unlock (L) Horn, med (U) Channel 5 (2) Channel 5 Latch On Demand Foreign Patent #199700312 #EP0817734B1 #98906445.6 #2,320,248 #701,285 Omega Research and Development, Inc. www.caralarm.com Page - 35 Page - 2... -
Page 3: Table Of Contents
Feature #23 Lock Relay Functions This Booklet Contains Factory Default Setting Door Lock Output press “arm/lock” button to program Introduction to the System ............. 4-6 Options: press “disarm/unlock” button to program Parking Light Output Status Light, Valet Switch, Controller & Transmitter Channel 4 Latch Output press “II”... -
Page 4: Introduction To The System
These features are described to explain their function; as these security and convenience system available today, the Crime Guard 750i by Omega features are dependent upon the installation configuration within the Research and Development. To enjoy the most from your new system, please take... - Page 5 Feature #18 Door Activated Anti-Carjacking Protection “P”rogram “III” button Factory Default Setting press “disarm/unlock” button to program button “II” button “disarm/unlock” press “arm/lock” button to program Option: button This form of Anti-Carjacking is initiated by a door being opened. The Anti- Carjacking protection, including the three ways to initiate it are described on page Feature #19 Remote Activated Anti-Carjacking Protection press “disarm/unlock”...
-
Page 6: Status Light, Valet Switch, Controller & Transmitter System Versatility - An Important Note
feature, there is a brief period of time in which a system activation, or alarm, cannot “II” or “ ” occur. This Arming Delay allows the system to completely process its sensory • Pressing the “ ” button for two seconds can be used to activate an extra output, parameters, which can include the vehicle to stabilize. -
Page 7: Using The Crime Guard System
Feature #11 Alarm Duration Using the Crime Guard System Factory Default Setting 30 Seconds Your Crime Guard system is designed to deter theft of both your vehicle and its press “arm/lock” button to program contents. “Arming” your system turns on the protection, disabling the vehicle’s Options: starter and locking the doors. -
Page 8: Automatic "Last Door Arming" Of The System
Feature #8 Open Door Bypass of Ignition Locking The Crime Guard system’s separate “arm/lock” and “disarm/unlock” button design allows repetitive operation- if already armed, pressing the “arm/lock” Factory Default Setting press “arm/lock” button to program button will simply rearm the system, and vice versa when pressing the “disarm/ press “disarm/unlock”... -
Page 9: While The System Is Armed, And Should It Trigger
Feature #5 Ignition Activated Override must be closed to initiate the Last Door Arming sequence. To temporarily prevent the system from automatically Last Door Arming, you have press “disarm/unlock” button to program Factory Default Setting these options: put the system into Valet Mode (page 14 and 15), leave the door open, Option: press “arm/lock”... -
Page 10: Disarming The System Using The Controller Or Transmitter
Feature #2 Last Door Arming is pressed. Which button being pressed has these effects upon the triggered Crime Guard system: Factory Default Setting • Pressing “arm/lock” will rearm the system, stopping both system’s alarm press “arm/lock” button to program Options: condition (leaving it armed), and stop the controller’s chirping. -
Page 11: Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override
Exit Programming mode: and briefly showing the number of operating controllers or transmitters. Step 7 Allow 10 seconds to pass without performing any programming If the Crime Guard was activated and reset itself: The disarming actions, or turn the vehicle’s ignition on. confirmation will no longer be 2 siren chirps, and the parking lights flashing twice •... -
Page 12: Remote Panic Feature
Step 2 Using the ignition key, turn the vehicle’s ignition switch on. How to Program Features Step 3 Within 5 seconds press and release the Valet Switch one time. The system The vehicle ignition key and the Valet Switch are used to enter the Programming will disarm. -
Page 13: Other Controller And Transmitter Operations
Other Controller and Transmitter Operations It is important to note that programmable features affect the exact To Silently Arm or Disarm the alarm, press and release the “II” button operation of the system, and that the descriptions of any features utilized should be used to supplement the basic system operations twice. -
Page 14: Using The Valet Switch
Step 2 Within 5 seconds of turning on the ignition, press the Valet Switch 5 times. Using the Valet Switch The siren will briefly sound, confirming that for the next 10 seconds the The Valet Switch is located in the Window Unit, or optionally, the installer may system is ready to learn a controller/transmitter code. -
Page 15: Securecode
To Exit Valet Mode, simply Press & Release the Valet Switch at any time. Controller and Transmitter Protection • The Status Light will turn off to confirm exit from either Valet Mode. The Crime Guard system features several security safeguards in one of the most vulnerable areas of any remotely controlled system. -
Page 16: The Status Light
The Status Light Anti-Carjacking Protection The Crime Guard is equipped with three separate Anti-Carjacking protection The Status Light visually confirms the status of the system and provides a high features, whose operation may be selectively activated by the ignition, by an open level of visual deterrence. -
Page 17: 2-Way Controller
6) Press and release the “:” button. Each press of the button changes to The 2-Way Controller the next melody, note that the LCD screen displays “S” and a numeral, which The four system- operating buttons are described on pages 4-7. This section is the melody number. - Page 18 used with an optional remote starting unit; the remote “start” icon (below) will rapid fashion, as in quickly repeating arm and disarm cycles, the controller will operate, but not this icon. not have time to receive the signal from the system, and therefore it will stop re- sponding and reporting the system’s status.