Safety Disarm Feature; Activation Alert; Automatic Rearming Disarming By Emergency Override - Omega Crime Guard 810i6 Operation Manual

press "disarm/unlock" button to program
Off (
Chirps Excepting Valet Mode
Chirps in Valet Mode Only
This feature removes the system's 1 arming and 2 disarming confirmation chirps.
When this feature is used to remove these chirps, the system will still have 3 chirps
upon arming if a protected zone is violated, and still have 4 chirps upon disarming
if the system was previously activated. Using this feature to turn off the arm and
disarming chirps will also not affect the Prewarning operation, Unauthorized
Transmitter Alert (if used), nor will it affect the chirps used when programming.
The other two settings will have the confirmation chirps operate only when the
system is in Valet Mode, and not otherwise; or, the chirps will operate except when
the system is in Valet Mode.
Feature #10 Confirmation Chirp Volume
Factory Default Setting Medium High
press "II" button to program
(
Options:
press "arm/lock" button to program
Low (softest) (
press "disarm/unlock" button to program
Medium Low (
High (loudest) ( press "III" button to program
This feature allows the choice of four different volume levels of the system's
confirmation chirps, and when programming it, the buttons can be repeatedly and
sequentially pressed, thus making it easy to hear and choose the setting with the
best chirp volume.
This feature operates regardless of how feature #15, "Steady Siren" or "Pulsed
Horn" is set. Feature #15 sets "Steady"; or "Pulsed" as three different timings, for
the activated alarm period output. This feature, #10, affects only the confirmation
chirps.
Feature #11 Alarm Duration
Factory Default Setting 30 Seconds
press "arm/lock" button to program
(
Options:
press "disarm/unlock" button to program
60 Seconds (
press "II" button to program
90 Seconds (
120 Seconds ( press "III" button to program
This feature allows four choices of the Alarm Duration, which is the period of time
for which the system sounding the siren (and/or horn, optionally) and flashes the
parking lights when it is triggered. Caution: Before lengthening the Alarm
Duration you should always check and determine if there are any local anti-
noise or nuisance ordinances in your area, to avoid the possibility of receiving
a violation citation.
( press "II" button to program
press "III" button to program
(
)
)
)
)
)
)
Page - 30
If the system was activated and reset itself: The disarming confirmation will
)
no longer be 2 siren chirps, and the parking lights flashing twice before staying on
)
with the interior lights. Instead, the system will respond with 4 siren chirps and the
)
parking and interior lights flashing 4 times before staying on for 30 seconds. The
Status Light will change to flashing two to four times in red between pauses as a "Zone
Violation" code to indicate which protection circuit triggered the system (2 flashes,
hood/trunk; 3 flashes, doors; 4 flashes , impact sensor). These special audible and
visual disarming indications, and Zone Violation code, will remain this way until the
ignition key is turned "on".
Safety Disarm/Storm Mode: While the system is activated, i.e. sounding the
siren and flashing the lights, pressing the "disarm/unlock" button will disarm the
system, but not unlock the doors. This safety feature ensures that the vehicle remain
secure should the system require disarming due to being activated from nuisance or
malicious false sensory inputs, such as typically produced by severe weather
conditions. To remotely unlock the doors if the system is disarmed while activated,
simply repeat the disarm operation by pressing and releasing the "disarm/unlock"
button again. If disarmed from a panic mode, the normal disarm indications are
)
present, including the unlocking of the doors.
Automatic Rearming Feature: Automatic Rearming is a programmable feature
which ensures that your system is never inadvertently disarmed. It is possible to
accidentally or unknowingly operate the transmitter from a pocket or purse. You
may not even be aware of an accidental disarming due to the enhanced operating
distance offered by the system's extended range. Automatic Rearming has the alarm
rearm itself 90 seconds after it is has been disarmed, unless a vehicle door is opened
and the ignition key turned on. Automatic Rearming is confirmed by a fast flashing
Status Light after the disarming, unless the system was triggered, in which case a Zone
Violation code will flash instead.
During the 90 second period, Automatic Rearming can be paused by opening the
door or stopped completely by turning the ignition key "on". Also, Automatic
Rearming can be cancelled by the Safety Disarm/Storm Mode feature; if the system
)
is disarmed while triggered, Automatic Rearming will not occur.
Disarming the System by Emergency Override
Should the transmitter become lost, damaged, or its batteries become exhausted,
the Valet Switch and the vehicle's ignition key may be used to disarm the system:
Step 1 With the system in the armed condition, enter the vehicle via the driver's
door (be aware that the alarm will trigger when the door is opened).
Page - 11