Running The Self Tests; Selecting An Emulation - Oki ML3320 Help Manual

Running the Self Tests

Font Sample Test
To run the test: Turn the printer off, then press and hold
LF while turning the printer on.
To stop the test: If you wish to stop the test before it is
complete, press SEL.
ASCII Test
To run the test: Turn the printer off, then press and hold
QUIET while turning the printer on.
To stop the test: Press SEL.
LF
Micro Feed
Down
GROUP
QUIET
TOF

Selecting an Emulation

Your printer has three emulations:
®
• Epson FX
®
• IBM Proprinter III
®
• MICROLINE Standard
The printer comes set for the IBM Proprinter III emulation.
To change to one of the other emulations:
1. Make sure paper is loaded.
2. Deselect the printer (SEL light off, press SEL key).
3. Press SHIFT + SEL: the printer will enter the Menu
Mode.
SEL
LF
SEL
Micro Feed
SHIFT
MENU
Down
EXIT GROUP
POWER ALARM
FF/LOAD TEAR PARK QUIET
Micro Feed
TOF
Up
ITEM SET PRINT
MENU