Table of Contents
Advertisement
Running the Self Tests
Font Sample Test
To run the test:
Turn the printer off, then press and hold
LF while turning the printer on.
To stop the test:
If you wish to stop the test before it is
complete, press SEL.
ASCII Test
To run the test:
Turn the printer off, then press and hold
QUIET while turning the printer on.
To stop the test:
Press SEL.
12
LF
Micro Feed
Down
GROUP
QUIET
TOF
Selecting an Emulation
Your printer has three emulations:
®
•
Epson
FX
®
•
IBM
Proprinter III
®
•
MICROLINE
Standard
The printer comes set for the IBM Proprinter III emulation.
To change to one of the other emulations:
1. Make sure paper is loaded.
2. Deselect the printer (SEL light off, press SEL key).
3. Press SHIFT + SEL: the printer will enter the Menu
Mode.
SEL
LF
SEL
Micro Feed
MENU
SHIFT
Down
EXIT
GROUP
POWER
ALARM
FF/LOAD
TEAR
PARK
QUIET
Micro Feed
TOF
Up
ITEM
SET
PRINT
MENU
ML3310/11
Advertisement
Table of Contents
