Selecting A Printer Driver - Oki ML3320 Help Manual

4. Press LF.
The following line will print:
Printer Control
5. Press TEAR consecutively until the emulation you wish
to select prints in the right-hand column.
6. Press SHIFT + SEL to save your setting and exit the
Menu Mode.
SEL
LF
SEL
Micro Feed
SHIFT
MENU
Down
EXIT GROUP
POWER ALARM
LF
Micro Feed
Down
GROUP
Emulation Mode IBM PPR
TEAR
SET
NU
FF/LOAD TEAR PARK QUIET
Micro Feed
Up
ITEM SET PRINT
MENU

Selecting a Printer Driver

Before you can use your printer with software, you must enter
the software and select the correct printer driver. If you have
the wrong driver selected, you will see strange characters,
incorrect fonts, etc.
Important! See your software documentation for
information on how to select a printer driver.
Printer Drivers
The drivers below are listed by decreasing compatibility with
your printer: use one as close to the top of the list as possible.
IBM Proprinter III
ML3320/1 IBM
IBM Proprinter III
IBM Proprinter II
IBM Proprinter
TOF
IBM Graphics Printer
Epson FX Microline Standard
ML3320/1 Epson Microline 320/321
Epson FX286e Microline 320/321
Epson FX 850/1050 Microline 320/321
Epson FX 86/286 Microline 292/293
Epson FX Microline 192/193
Epson FX800/1000 Microline 182/183