Oki ML3320 Help Manual page 36

This feature is normally turned off. To activate it:
1. Press SHIFT ( ) + SEL ( ).
SEL
SEL
Micro Feed
MENU SHIFT
Down
EXIT GROUP
POWER ALARM
2. Press GROUP ( ) until one of the following lines
appears, depending on which paper feed you are using:
REAR FEED Form Tear-Off OFF
BOTTOM FEED Form Tear-OFF OFF
3. Press SET ( ) until the time interval you wish to select
appears in the third column.
4. Press SHIFT ( ) + SEL ( ) to exit Menu Mode and
save the setting.
FF/LOAD TEAR PARK QUIET
LF
Micro Feed
TOF
Up
ITEM SET PRINT
MENU
Note: Some programs pause occasionally while sending
data. If the pause is too long, the paper will advance
to the tear-off position until more data is received.
This extra paper movement can cause uneven print
registration in graphics. If you have this problem,
use the menu to turn off this feature.
Paper Park Feature
SEL
SEL
Micro Feed
MENU SHIFT
EXIT GROUP
POWER ALARM
To retract rear-feed paper from the paper path, press PARK
( ).
LF FF/LOAD TEAR PARK
Micro Feed
Down
Up
ITEM SET PRINT
MENU
QUIET
TOF