Brightness; Smart Zoom; Smart Zoom Settings; Enable Overview Mode - Audiovox NVX225 - Automotive GPS Receiver User Manual

Gps navigation software for audiovox nvx225

Hide thumbs Also See for NVX225 - Automotive GPS Receiver:

Table of Contents

Smart power save

You can also initiate this special feature of The NVX225 Navigator. Smart Power

save will light up the screen only when you press or tap a button, or if The NVX225

Navigator has something to show you. After a few seconds the light level decreases,

and after another few seconds the backlight turns off. This helps you achieve a

longer battery life.

5.6.2.2

Brightness

With this switch you can instruct The NVX225 Navigator to use the original settings of

the PND device (previously set in the operating system at Start/Settings/Backlight), or

you can set the backlight level separately for both daylight and night modes, thus

enhancing the effect of the night color scheme.

Smart zoom is a lot more than just a usual automatic zoom.

While navigating a route: when approaching a turn, it will zoom in and raise the view

angle to let you easily recognize your maneuver at the next junction. If the next turn

is at a distance, it will zoom out and lower the view angle to be flat in order to let you

see the road in front of you, or it can even switch to an Overview mode to let you

follow your position on the map.

While cruising: if there is no active route and you are just driving, Smart Zoom will

zoom in if you drive slowly and zoom out to the limit set here when you drive at high

speed.

These automatic features can be personalized on this screen.

5.6.3.1

You can set how close Smart Zoom can zoom in when approaching the next turn

(Zoom-in limit), and the maximum zoom level to zoom out when the next turn is

further away (Zoom-out limit). The default values are set to be optimal in most cases.

5.6.3.2

You can configure how the Overview mode is triggered when the next turn is at a

distance.

Table of Contents