Craftsman 137.375640 Operator's Manual page 13

Supplied
Blade Wrench
Not supplied
Adjustable Wrench
6 mm Hex Wrench
Combination Square
Phillips Screwdriver
Slotted Screwdriver
COMBINATION SQUARE MUST BE TRUE
Should not gap or overlap when square is flipped over (see dotted figure).
Draw light line on
board along this edge.
4--
Straight edge on a 3/4 in. board - this
edge must be perfectly straight.
! t
i t
Should not gap or overlap when square
flipped over (see dotted figure).