Connecting A Hub - Cisco 805 Hardware Installation Manual

Table 2-1
Network Device Connected to Router
Hub with equivalent to router HUB/NO HUB
button
Hub with equivalent to router HUB/NO HUB
button
Hub without equivalent to router HUB/NO
HUB button
Server, PC, or workstation
1 Hub vendors choose different names for the button controlling cable selection. This table uses the Cisco 1528
Micro Hub 10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for
your particular hub. Refer to your hub documentation for details.

Connecting a Hub

Before connecting a hub, refer to Table 2-1 to determine how to set the router
HUB/NO HUB button and the hub equivalent of the HUB/NO HUB button if applicable.
Follow the steps in Figure 2-3 to connect a hub.
Connecting Ethernet Devices
Connecting an Ethernet Device
Router HUB/NO HUB
Button Setting
HUB (in)
NO HUB (out)
NO HUB (out)
NO HUB (out)
Installing the Cisco 805 Router 2-7
Hub Button
1
Setting
MDI (in)
MDI-X (out)
MDI-X (out)
–