Main Cooling And Booster Cooling Kit; Figure 7-16 Cable Management Kit On The Plenum Chamber; Table 7-2 Cooling And Booster Kit - Cisco MGX 8220 Installation And Configuration Manual

Cable Management

Figure 7-16 Cable Management Kit on the Plenum Chamber

Attach bracket to rear rail (if
present)using 10-32 thread
forming screws
Inner bracket,
attach with 10-32 thread
forming (self tapping)
screws and washers

Main Cooling and Booster Cooling Kit

The cable management kit that is installed on the cooling module and booster cooling module consists
of a set of brackets, a power routing assembly, and the cable management panel as shown in Table 7-2.
Table 7-2
Description
Number 10 flat washer
10-32, 0.375 in. long screws with locking nuts
10-32, 0.375 in. long thread forming screws
Cable support
Power and fan cable management assembly
Short fan panel bracket
Cable management panel
Cisco MGX 8220 Installation and Configuration
7-22
Outer bracket, attach
with 10-32 screws with
locking nuts
Cooling and Booster Kit
Plenum chamber
Cable management panel,
attach with 10-32 screws with
lock nuts and washers
Quantity
12
8
8
2
2
2
1
Release 5.0, Part Number 78-6430-03 Rev. D0, November 2003
Chapter