Switch Accessory Kit - Cisco CQ211L01-48H8FH Hardware Installation Manual

Prepare for Installation
• Grounding cable sized according to local and national installation requirements; the required length
• Crimping tool for lug.
• Wire-stripping tool.
• M4 screws to fix brackets (16).
• M4 screws to fix a ground lug (2).

Switch Accessory Kit

The following table contains the switch accessory kit PIDs. The switch accessory kit contains the rack
mount kit and the ground lug kit. The rack mount kit present in the accessory kit contains the screws and
brackets required for installation.
Table 2: Switch Accessory Kit
Switch
Cisco
Hardware Installation Guide for Cisco CQ211L01 Switch
8
depends on the proximity of the switch to proper grounding facilities. Cisco provides a 6 AWG lug.
Accessory Kit
Switch Accessory Kit
Rack Depth Range
For rack depths between 23.
(6 mm) and 32 in. (812.8
mm).
in.