Cisco Aironet 1550 Installation Manual page 99

Chapter 2 Installing the Access Point
Connect the streetlight power tap adapter to the access point AC power connector, as shown in
Step 9
Figure 2-39
Figure 2-39
1 AC power connector
Figure 2-40
1 AC power connector
Step 10 Plug the streetlight power tap adapter into the outdoor light control fixture, as shown in
Step 11 Plug the outdoor light control into the streetlight power tap adapter.
Ensure that the antennas are connected to the access point before you apply power to the access point.
Step 12
Turn on the power to the outdoor light control fixture at the designated circuits.
Step 13
OL-24247-01
and Figure 2-40. Hand-tighten the connector.
AC Power Connector - Shown on Access Point Model AIR-CAP1552E-x-K9
4
AC Power Connector - Shown on Access Point Model AIR-CAP1552I-x-K9
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
5
1
Powering the Access Point
6
1
Figure 2-38.
2-53