Cisco Aironet 1550 Installation Manual page 81

Chapter 2 Installing the Access Point
Figure 2-25
1 M8 x16 bolt (supplied with pole mount kit)
2
M8 x16 bolt (supplied with pole mount kit)
Position the two bolts on the access point into the quick mount notches on each side of the mounting
Step 5
bracket (see
Screw a M8 x16 bolt (with flat and lock washers) into the second bolt hole on each side of the access
Step 6
point.
Ensure that the front of the access point is vertical, and tighten the four bolts to 13 to 15 ft lbs
Step 7
(17.6 to 20.3 Nm).
Step 8 For the 1552CU access point, continue with
continue with
OL-24247-01
1552C Access Point Facing Up in Vault Location
Figure 2-23). Ensure that the hinged door is facing out.
Powering the Access Point, page
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
3 F-connector
Installing Antennas, page
2-45.
Mounting the Access Point
1
2
3
2-36. For the 1552C access point,
2-35