Menu Keys - Furuno FR-2125V Operator's Manual

1.30.4 Own ship symbol
The own ship symbol ( ) can be displayed/erased on the RADAR 2 menu. The symbol is
scaled to indicate the length and beam of the vessel. If the largest dimension of the sym-
bol gets smaller than 6 mm, the symbol will disappear and own ship will be represented
with a small dot or circle depending on the range in use. Details should be entered during
installation.

1.31 Menu Keys

Three menu keys are provided on the right hand corner of the control head: [RADAR
MENU], [PLOT MENU] and [NAV MENU].
RADAR MENU: Permits setting of basic radar parameters.
PLOT MENU: Permits setting of Electronic Plotting Aid (EPA) parameters or the optional
ARPA ARP-26.
NAV MENU: Provides a choice of navigation data for on-screen display. Also selects dis-
play data for the optional Video Plotter.
Note: Menu automatically goes off in 30 seconds if you do not press a key.
1-38
HL PANEL MODE
AUDIO
OFF BRILL
OFF
2 3
1
OFF LOST
VECTOR
CENTER TARGET
4 5 6
ACQ
CHART
EBL MARK
ALIGN
TARGET
7 8 9
DATA
TARGET CU, TM A/C
TRAILS RESET AUTO TARGET
CANCEL
CANCEL 0
ENTER
Figure 1-40 Control head, menu keys
RADAR PLOT NAV
MENU MENU MENU