Furuno FR-2125V Operator's Manual page 122

6.7.3 Displaying a waypoint
A single waypoint may be shown on the display.
1. Press [NAV MENU], [1] and [8] to choose the WAYPOINT menu.
3. Press the [2] key twice to select WPT ON and then press the [ENTER] key.
4. Press the [3] key.
5. Enter waypoint number in two digits and press the [ENTER] key. The latitude and
longitude position of the waypoint appear on the menu and the waypoint is displayed
on the screen.
To hide the waypoint, select OFF in step 3 and press the [ENTER] key.
6-12
[WPT LIST]
1 [ENTER WPT, NAVLINE]
WPT
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
xx xx xx.xxxN
xxx xx.xxxE
9 ERASE WPTxx
0 [WPT LIST 2]
Figure 6-13 WPT LIST
[WAYPOINT]
1 [NAV INFORMATION 1]
2 WPT MARK OFF/ON
3 WPT WPT xx
xx xx.xxxN/S
xxx xx.xxxE/W
4 WPT LINE OFF/ON
5 WPT NO. OFF/ON
6 WPT DISPLAY NO. 1/ALL
7 WPT DATA VIDEO PLOTTER/NAVAID
8 ARRIVAL ALARM OFF/ON
x.xxNM
xx.xMIN
Figure 6-14 WAYPOINT menu