Safety Tips; Care And Maintenance - Hamilton Beach OG01 Assembly And Operation Manual

POST-ASSEMBLY

SAFETY TIPS:

1. Always check for leaks after every LP tank change.
2. Always check for leaks before each use.
3. Use long barbeque tools to avoid burns.
4. Check all gas supply fittings for leaks before each use. It is handy to keep a spray bottle
of soapy water near the shut-off valve of the gas supply line. Spray all of the fittings.
Bubbles indicate leaks.
5. Disconnected LP tanks must have threaded valve plugs tightly installed and must not be
stored in a building, garage, or any other enclosed areas.
6. Turn off all control knobs and LP tank valve when the grill is not in use.
7. If the appliance is stored indoors, the LP tank must be disconnected and removed from
the grill.
8. LP tanks must be stored outdoors in a well-ventilated area. Disconnected LP tanks in
storage or being transported must have a safety cap.
9. Never leave an LP tank in a recreational vehicle or boat which may become overheated
by the sun.
10. Do not store LP tank in or near an area where children play.
11. For any other problems, see "Troubleshooting" or contact Consumer Affairs.
MAINTENANCE:
1. Keep the grill area clear and free from combustible materials, gasoline, and other
flammable vapors and liquids.
2. Keep the holes in the three sides of the cart clear and free from debris, ensuring the flow
of combustion and ventilation air is unobstructed.
3. Visually check burner flames as following:
• Remove cooking grids and flame tamers.
• Light burners.
• Turn knobs from HI to LO and check the flame status. The flame in the LO position
should be smaller than in the HI position, as figure shown below.
• Always check flame before each use. See "Troubleshooting" if any abnormal status is
found.
4. Visit our website, www.hamiltonbeach.com, or call Consumer Affairs at 1-800-851-8900 for
replacement parts.
28
SAFETY TIPS

CARE AND MAINTENANCE

HI
LO