Hamilton Beach OG01 Assembly And Operation Manual page 15

Hide thumbs Also See for OG01:

Table of Contents

Available languages

ASSEMBLY

STEP 5: Side Shelves

Attach the right shelf to firebox as follows:

1. Locate side shelf onto support brackets located on side of the fire box as shown in Fig. 5a

and remove the cooking grids from the firebox.

2. From the outside of the firebox, attach the right shelf (marked "R") with two (2) M6 x 13

screws and two (2) M6 flat washers as shown in Fig. 5b.

3. From the inside of the firebox, attach the right shelf with two (2) M6 x 13 screws and two (2)

M6 compression washers as shown in Fig. 5c.

4. Repeat above Steps 1–3 for the left shelf (marked "L").

ASSEMBLY STEPS

Fig. 5a

Support Brackets

Table of Contents

Chapters

Table of Contents

84131